目錄

• 環境
• 安裝
• 修改配置文件
• 主配置文件
• 區域配置文件，添加正向解析配置
• 正向區域數據文件
• 啟動DNS服務
• 測試

環境

操作系統：CentOS 7

IP地址：10.27.106.201

測試域名：aec.testuc.com

作用：主要提供解析aec.testuc.com域名的服務

安裝

yum -y install bind

修改配置文件

主配置文件

vim /etc/named.conf

主要修改以下兩個地方

listen-on port 53 { any; };

allow-query { any; };

//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//
// See the BIND Administrator"s Reference Manual (ARM) for details about the
// configuration located in /usr/share/doc/bind-{version}/Bv9ARM.html

options {
listen-on port 53 { any; };
# listen-on port 53 { 127.0.0.1; };
listen-on-v6 port 53 { ::1; };
directory       "/var/named";
dump-file       "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
recursing-file  "/var/named/data/named.recursing";
secroots-file   "/var/named/data/named.secroots";
allow-query     { any; };
# allow-query     { localhost; };

/* 
 - If you are building an AUTHORITATIVE DNS server, do NOT enable recursion.
 - If you are building a RECURSIVE (caching) DNS server, you need to enable 
   recursion. 
 - If your recursive DNS server has a public IP address, you MUST enable access 
   control to limit queries to your legitimate users. Failing to do so will
   cause your server to become part of large scale DNS amplification 
   attacks. Implementing BCP38 within your network would greatly
   reduce such attack surface 
*/
recursion yes;

dnssec-enable yes;
dnssec-validation yes;

/* Path to ISC DLV key */
bindkeys-file "/etc/named.root.key";

managed-keys-directory "/var/named/dynamic";

pid-file "/run/named/named.pid";
session-keyfile "/run/named/session.key";
};

logging {
channel default_debug {
file "data/named.run";
severity dynamic;
};
};

zone "." IN {
type hint;
file "named.ca";
};

include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";

區域配置文件，添加正向解析配置

vim /etc/named.rfc1912.zones

末尾添加如下配置：

zone "aec.starnetuc.com" IN {     #正向解析為"aec.starnetuc.com"
type master;      #類型：主緩存為master
file "aec.starnetuc.com.zone";    #指定區域數據文件為aec.starnetuc.com.zone
allow-update { none; };
};

正向區域數據文件

拷貝其他區域數據文件，保留源文件的權限和屬主的屬性復制

cp -a /var/named/named.localhost /var/named/aec.starnetuc.com.zone

修改該文件，結果如下：

$TTL 1D  	#有效解析記錄的生成周期
@       IN SOA  aec.starnetuc.com. root.aec.starnetuc.com. (
#@表示當前的DNS區域名表示這個域名  
#SOA表示授權信息開啟 
# 后面表示郵件地址因?yàn)锧有特殊含義 所以使用.代替 
0       ; serial  #更新序列號，可以是10以內的整數
1D      ; refresh #刷新時間，重新下載地址數據的間隔
1H      ; retry   #重試延遲，下載失敗后的重試延遲
1W      ; expire  #失效時間，超過該時間仍無法下載則放棄
3H )    ; minimum #無效解析記錄的生存周期
IN      NS      aec.starnetuc.com. #記錄當前區域DNS服務器的名稱
IN      MX 10   aec.starnetuc.com. #MX為郵件服務器 10表示優先級 數字越大優先級越低
IN      A       10.27.106.214      #記錄正向解析域名對應的IP，即將域名與IP綁捆

檢查配置是否正確

named-checkconf -z /etc/named.conf

僅檢查語法不檢查邏輯關系。當顯示的全為0時表示沒有語法錯誤

zone localhost.localdomain/IN: loaded serial 0
zone localhost/IN: loaded serial 0
zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 0
zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0
zone 0.in-addr.arpa/IN: loaded serial 0
zone aec.starnetuc.com/IN: loaded serial 0

啟動DNS服務

啟動前，檢查防火墻、SELINUX安全模式是否是關閉或允許狀態

啟動

systemctl start named
systemctl enable named

查看53號監聽端口是否開啟

測試

將測試系統的DNS改為10.27.106.201，然后去

ping aec.starnetuc.com

PING aec.starnetuc.com (10.27.106.214) 56(84) bytes of data.
64 bytes from 10.27.106.214 (10.27.106.214): icmp_seq=1 ttl=64 time=1024 ms
64 bytes from 10.27.106.214 (10.27.106.214): icmp_seq=2 ttl=64 time=4.31 ms
64 bytes from 10.27.106.214 (10.27.106.214): icmp_seq=3 ttl=64 time=5.53 ms

表明配置成功。

到此這篇關于關于在Linux下如何搭建DNS服務器的文章就介紹到這了,更多相關Linux搭建DNS服務器內容請搜索以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持！